風科流行盒尺寸 – 4″6″10″ 英寸流行乙烯基保護器

we are the manufacturers of funko pop protectors

最小起訂量：1000PCS Made in China and shipped

跟你姓, 我哋使用優質PET塑料, 流行盒有一個保護膜蓋，客戶可以輕鬆將其剝離. These cases keep your boxed collectibles free from dust and fingerprints and scratches.

Plus, they create a stronger structure so you can now stack your collectibles on your display shelves without worrying about box damage or warping! This is a funko premium pop protector. we can do custom funko pop protectors.

4 inch Funko Pop Box Dimensions – size

4 funko pop protector boxes Available material thickness

所以, there is 0.35mm, 0.4毫米, 0.45毫米, 0.5mm 0.60mm thickness PET for your choice(Can use recycled 瑞特 材料, GRS certification)

4 inch funko pop protector boxes advantages

• Locking Insert on the Top of the Protector to Ensure Your POP! STAYS in its Protector in the Event of a Fall.
• Easiest Assembling Protector Ever. SPENDING LESS TIME ASSEMBLING PROTECTORS & MORE TIME ENJOYING YOUR COLLECTION
• High Impact Strength & Structural Rigidity for Better Protection. But Agreenpackaging sells PROTECTORS ONLY no Figurines Included.
• Clear Acid-Free Case W/ Removable Protective Film.
• 100% 可回收: in short, we use the highest tier Raw PET plastic that contains no acid and it is 100% recyclable environmentally friendly
• Perfect Fit: custom pop protectors are designed to fit perfectly with 0 extra room for the box to move inside.
• Auto Locking: Not only with an interlocking design that makes the protector flat at the bottom. But also easy to assemble. new uses.

風科流行盒尺寸 – 6″ Inch size

6 inch funko pop box dimensions

Funko Pop Box Dimensions Inch size Centimeter size Mm size Protector material thickness

6 inch pop protector box Available material thickness

例如, we have 0.35mm, 0.4毫米, 0.45毫米, 0.5mm 0.60mm thickness PET for your choice(Can use recycled RPET material, RCS certification)

6 inch funko pop box protector advantages

• Locking Insert on the Top of the Protector to Ensure Your POP! STAYS in its Protector in the Event of a Fall.
• Easiest Assembling Protector Ever. SPEND LESS TIME ASSEMBLING PROTECTORS & MORE TIME ENJOYING YOUR COLLECTION.
• High Impact Strength & Structural Rigidity for Better Protection. Agreenpackaging sells PROTECTORS ONLY no Figurines Included.
• Clear Acid-Free Case W/ Removable Protective Film.
• 100% 可回收: We use the highest tier Raw PET plastic that contains no acid and it is 100% recyclable environmentally friendly.
• Perfect Fit: Most important that Our cases are designed to fit perfectly with n0 extra room for the box to move inside.
• Auto Locking: Not only with an interlocking design that makes the protector flat at the bottom. But also easy to assemble. new uses.

Each funko pop protector 6 inches is Individually Wrapped!

Each funko pop protector 6 inch comes individually wrapped in a protective film that easily peels away so that you never receive scratched or dirty cases. When you receive your cases, all you have to do is gently peel away that protective film layer before you pop open the case and lock it together!

Above all, fits all 6 inch sized Funko with the dimensions of approx 8″ x 6.5″ x 5.5.” (WILL NOT FIT for Old Hulkbuster #73, Hagrid #07 and Winston #97 because they come in a smaller box, Hulk & Bruce Banner #284 and Big Bird #10, because the box is bigger). Please check the size of your 6 in funko pop box size before ordering and it is a great way to store and display all your Funko!

funko pop protector case – 10″ Inch Pop

10 inch funko pop box dimension

10 inch funko pop protector Available material thickness

例如, we have 0.35mm, 0.4毫米, 0.45毫米, 0.5mm 0.60mm thickness PET for your choice(Can use recycled RPET material, RCS certification)

風子流行保護器 10 inch advantages

• NO DETERIORATION WITH TIME Our protectors is made of the highest tier NEW PET PLASTIC, NOT PVC involved. Over 57% of PVC contains chlorine, and it will break down over time, leaching chemicals onto whatever it is in contact with.
• Stack and display your rare exclusive or favorite character in their original packaging without worrying about any box damage.
• 最緊要係, it is EASY TO PEEL PROTECTIVE FILM Each case is individually wrapped with its own wrapping film that keeps the protector from getting scratched before it gets to you.
• Auto Locking: Not only with an interlocking design that makes the protector flat at the bottom. But also easy to assemble. new uses.
• ENVIRONMENTAL CONCERNED By purchasing PET, you are doing your part to support their reuse, so all parts of it can be recycled and turned into a multitude of new uses.

funko pop box protector 2 包

funko pop box protecto2 pack size

then, Fit Dimensions 8″ x 6.25″ x 3.5″

10 funko pop box dimensions MM（CM） : 209*165*92毫米(8.25″ x 6.5″ x 3.625″) （20.9*16.5*9.2CM）

in the meanwhile, We can confirm that this protector fits:

1) 2 Pack Superman
2) 2 Pack Daenerys & Drogon
3) 2 Pack Joker and Bank Robber
4) 2 Pack Khal & Khaleesi
5) 2 Pack Fred & Barney
6) 2 Pack Leo & CoCo
7) 2 Pack Manny Paquiao
8) 2 Pack Dr. Peter Venkman & Slimer Metallic
9) 2 Pack Derrick Rose & Russel Westbrook
10) 2 Pack Dwyane Wade & Stephen Curry
11) 2 Pack Lebron James & Dwight Howard
12) 2 Pack Belle Twins
13) 2 Pack Fiona & Cake
14) 2 Pack Same & Dean
15) 2 Pack Lady & The Tramp

爆破保護器 2 pack Available material thickness

例如, we have 0.35mm, 0.4毫米, 0.45毫米, 0.5mm 0.60mm thickness PET for your choice(Can use recycled RPET material, RCS certification)

2 pack funko pop protector advantages

1, Our pop protectors are designed to keep your Funko POP safe from knocks, falls, and dust.

2, Most important is that they are made from extra strong recyclable plastic, which means you can stack them without crushing the presentation box.

3, 此外, each pop protector is individually wrapped with an easy-to-peel protective film to avoid scratching during transit and before you display your POP.

4, The D-Lock tab locks the rear of the protector to the top to prevent dust from entering your POP.

5, The bottom uses an auto closing design that keeps the protector flat to help stack your POPs and maintain their shape. Auto Locking: Not only with an interlocking design that makes the protector flat at the bottom. But also easy to assemble. new uses.

Are Funko Pop Cases Worth the Investment?

Sure, funko pop case near me and you. If you are a true collector who likes their pops to remain in mint condition, protective cases are a must-have. It is worth you really need to invest in pop cases for your 10″ collectibles. 因此, we can provide funko pop protector 10 inch/10-inch funko pop protector.

首先, if you have sunk more money than you should have into collectible figures, then yes, cases are a must-have.

secondly, if you stack your boxed collectibles on shelving, then yes, protective cases are a must-have.

最後一刻, if you display your collectibles and want to maintain a pleasing display layout, then yes, cases are a must-have.

Customize your funko pop protector size and 凹凸

In addition to some market-wide Funko pop protectors, we also support custom sizes and embossing. If you are developing new products and protectors, you may wish to communicate with us to customize

同時, 我哋也有 transparent plastic box packaging and thermoforming 吸塑包裝 和 塑料管 packaging production projects can also provide services for you at the same time

In short, please contact us for a Free sample.